Preparation and Equipment
Essential Tools for Installation
- M10 Spline Bit
- 17mm Spanner
- Ratchet with 17mm
- Socket & 5/8 Socket
Your DIY Kombi Bed Kit Includes
- 4x Legs with Nuts
- 2x Side Brackets (specific bolts are attached to these pieces for fitting above the wheel arches)
- Step-by-Step Instruction
For vans with carpeting, you’ll need to locate and expose the holes above the wheel arches by cutting the fabric.
Step-by-Step DIY Kombi Bed Installation
Removing Lash Loops & Installing Legs: Start by using the M10 Spline Tool to remove all lash loops. Then, attach the four upright legs. The front two should be bolted to the floor, while the rear two should have black thumb bolts for easy removal.
Fitting Side Brackets: Identify the hole above each wheel arch. In carpeted vans, cut the material to fit the bracket. Secure the side brackets with the provided 7/16 bolts, but do not fully tighten them yet.
Positioning the Bed: With the bed in a half-folded position and the hinges facing the rear, lift it onto the two front legs and side brackets with assistance. Attach the M10 nuts from underneath to secure the bed to the front legs and arch brackets.
Securing the Rear Section: Unfold the bed and secure the back section to the rear legs using the M10 wing nuts.
Final Tightening: Once all parts are in place, tighten all nuts and bolts with the 17mm spanner for the legs and side brackets.
Post-Installation: Enhancing Your Space
After you install your Kombi bed, it serves not only as a comfortable sleeping area but also as a storage system when folded. This offers ample scope for further customisation and efficient use of space.
Additional Customisation and Maintenance Tips
Consider exploring further enhancements such as personalising your bed space with ambient lighting, adding bedding storage solutions, or integrating safety features for a secure installation. Regular maintenance and care will ensure your DIY Kombi Bed remains in top condition, ready for all your adventures.
Got any questions or need a hand with something that’s not mentioned in the guide? Don’t hesitate to get in touch. We’re here to make sure your Kombi bed conversion goes smoothly. Give us a shout — we’re ready to assist so you can get the job done right.
